DC-ILMI provides Integrated Local Management Interface (ILMI) functions, allowing exchange of configuration information between two ILMI components at opposite ends of a link.
Functions and Features
DC-ILMI includes the following functions.
- Support for the ATM Forum ILMI Version 4.0 specification
- Interoperability with implementations of the ATM Forum ILMI Version 3.0 and 3.1 specifications
- ILMI for IISP Links
- ILMI Connectivity Procedures
- Automatic Configuration
Procedures for
- ATM Interface Type and Interface Management Entity (IME) Type
- Per-ATM Layer Interface Attributes
- Address Registration
Procedures for
- Network Side IME
- User Side IME
- Modification of Local Attributes for ATM Layer Interface Table
- Access to ILMI MIB tables through an SNMP agent
- Cold Start Trap
The following functions may be included or excluded depending on the scope of your license.
- Change of Attachment Point Detection Procedures
- Secure Link Procedures
- SNMP Proxy-Agent support
for
- the ILMI MIB
- the ATM Forum PNNI MIB
- the subset of the AToM MIB supported by the combination of DC-Signalling and DC-Call Control
- the LANE Client MIB
- LANE Services MIB tables as supported by DC-LANE Services
- the MPOA Configuration MIB (MPOA Client), MPOA MIB (MPS Basic Compliance), and complementary tables from the NHRP MIB
- the MIB II ipNetToMediaTable (defined in RFC 1213)
- the Classical IP MIB (defined in RFC 2320)
- the ATMARP MIB as used by DC-IPOA.
- Support for the Service Registry MIB table
- Access to external support for the Virtual Path ABR Group and Virtual Channel ABR Group tables
Supported SNMP PDUs
DC-ILMI supports the following SNMP PDUs. For more information about how these are used in the ILMI protocol, refer to the ILMI specification.
- GetRequest-PDU
- GetNextRequest-PDU
- GetResponse-PDU
- SetRequest-PDU
- Trap-PDU
For more information about Data Connection's ATM products and expertise contact .