|
|
|
|
You can exit the 3270 emulation program in the following ways:
From within an emulation session, by using the 3270 EXIT key (default keystroke Ctrl + X)
From the main screen of the menu interface, by choosing Exit from the File menu
To exit the 3270 emulation program and return to the Solaris command prompt, follow these steps:
Log off any active sessions. (Logging off is recommended but not always necessary. The 3270 emulation program terminates active sessions if you exit emulation without logging off. However, with some host applications, this can cause problems when you next try to log on.)
Optionally, disable any active or enabled sessions.
From the main screen, choose Exit from the File menu. From a 3270 emulation session, press EXIT (default keystroke Ctrl + X).
If you have saved all changes (or have not made any changes) to your 3270 emulation style then you exit the 3270 emulation program. If you have any unsaved changes, you will be asked whether you want to save them. For complete instructions for saving style files, see Opening, Creating, and Saving Style Files.
You can also use the F3 key from any dialog box in the 3270 emulation program as a fast exit, which enables you to exit without having to return to the main screen first. The only dialog boxes in which you cannot use this key are the Redefining Key and Adding Key Definition dialog boxes.
You may see one or more confirmation messages. The exit process continues when you respond to the message, unless you choose <Cancel> to abandon the exit.
If a condition is detected that would normally cause a pop-up message (Error, Warning, or Information), the exit process stops, and the appropriate pop-up message is displayed. Correct the error condition, or take any other action that may be necessary, and then press F3 again to continue the exit.
|
|
|
 |
|